Week 53  This week we get the front of the hull

The bits we received

(and 4 screws not in the photo.)

And what we did with them

The inside of the hull needs painting red oxide, and the outside needs painting dark yellow.  I haven't attached the rear yet as that is already painted.

The front is glued in place where is touches the bottom of the hull, but the sides are only screwed, so I can loosen them to insert the rear after painting.

The interior was sprayed red oxide, and then the exterior was sprayed dark yellow.  I didn't bother masking anything.  There is a little over-spray here and there, but both the interior and exterior will get another coat in due course.

I loosened the screws holding the sides and inserted the rear bulkhead.   There are various spots that need a touch up, including the screw heads.  The exhausts will need masking of course, but this will wait until some more of the interior structure is fitted.

Things not yet done

Issue 19 : Fit ball and headlight
Issue 23 : Paint the radiator covers
Issue 24 : Finish the issue
Issue 25 : Complete issue
Issue 32 : Complete the tow cable
Issue 33 : Complete issue
Issue 38 : Paint the parts
Issue 39 : Entire issue
Issue 40 : Entire issue : Done, but now needs painting.
Issue 42 : Finish the issue
Issue 43 : Finish the issue
Issue 44 : Finish the issue
Issue 45 : Entire issue
Issue 46 : Entire issue
Issue 47 : Entire issue
Issue 49 : Paint and fit shackles
Issue 50 : Paint and fit shackles
Issue 51 : Paint and fit shackles
Issue 52 : Paint and fit shackles

Take me back to week 52

Take me to week 54